Table of Contents
Advertisement
5.5.5.3.
WAN Settings
Static IP
If your ISP offers you static IP Internet connection type, select "Static IP" and then enter IP address, subnet
mask, default gateway and primary DNS information provided by your ISP in the corresponding fields.
The page includes the following fields:
Object
IP Address
Subnet
Default Gateway
MTU
Primary DNS
Secondary DNS
Band Type
Up
Down
PPPoE (ADSL)
Select PPPOE if your ISP is using a PPPoE connection and provide you with PPPoE user name and password
info.
Figure 5-22 Static IP
Description
Enter the WAN IP address provided by your ISP. Enquire your ISP if you
are not clear.
Enter WAN Subnet Mask provided by your ISP.
Enter the WAN Gateway address provided by your ISP.
Maximum Transmission Unit. Default is 1500.
Enter the necessary DNS address provided by your ISP.
Enter the secondary DNS address provided by your ISP.
Select the band type provided by your ISP.
Enter limited upstream throughput in custom mode
Enter limited downstream throughput in custom mode
-49-
User Manual of WDAP-C1800AX
Advertisement
Table of Contents
