The page includes the following fields:
Object
Username
Password
Server Name
Service Name
MTU
Set DNS Manually
Primary DNS
Secondary DNS
Band Type
Upstream
Downstream
DHCP
Choose "DHCP" and the router will automatically obtain IP addresses, subnet masks and gateway addresses
from your ISP.
Figure 5-23 PPPoE
Description
Enter the PPPoE User Name provided by your ISP.
Enter the PPPoE password provided by your ISP.
Enter the server description or not.
Enter the service description or not.
Maximum Transmission Unit. Default is 1452.
Enable/Disable DNS Manually.
Enter the necessary DNS address provided by your ISP.
Enter the secondary DNS address provided by your ISP.
Select the band type provided by your ISP.
Enter limited upstream throughput in custom mode
Enter limited downstream throughput in custom mode
-50-
User Manual of WDAP-C1800AX