Page 11
Its streamlined body without the protruding antennas also gives effects of embellishment in the surroundings. Moreover, the WDAP-C7200AC is compliant with the IEEE 802.3at PoE standard, so it is easy and flexible in client-side installation. It is definitely nice to have this eye-catching access point mount on the ceilings and walls of villas, hotels, exhibit halls, and other establishments.
Page 12
256-QAM modulation where higher transmitting/receiving rates go up to 867Mbps in 5GHz less interference frequency band. In addition, the WDAP-C7200AC is equipped with gigabit LAN port to eliminate the restriction of 100Mbps Fast Ethernet wired connection to let users fully enjoy the high speed provided by wireless.
Page 13
WDAP-C7200AC offers more powerful and flexible capability for wireless clients. Flexible Deployment with PoE Feature Compliant with the IEEE 802.3at Power over Ethernet standard, the WDAP-C7200AC can be powered and networked by a single UTP cable. It thus reduces the needs of extra cables and dedicated electrical outlets on...
Page 39
User Manual of WDAP-C7200AC AP(Multi-SSID) Mode WDAP-C7200AC Internet SSID-1(5G) Clients SSID-2(2.4G) AP Mode Clients 5GHz Wireless Basic Settings of AP The page includes the following fields:...
Page 41
User Manual of WDAP-C7200AC AP(Multi-SSID) Mode Default is “ Click the “ ” button to show the status table of active wireless clients. Universal Repeater is a technology used to extend wireless coverage. To enable Universal Repeater Mode, check the box and enter the SSID you want to broadcast in the field below.
Page 50
User Manual of WDAP-C7200AC Wait until the connection established. Check the “ ” option and then reboot it. Client – Status Connect this Wireless AP with up to 8 WDS-capable wireless APs to expand the scope of network. WDS Bridge-PtP Mode...
User Manual of WDAP-C7200AC Connect this wireless AP with up to 8 WDS-capable wireless APs, and connect another AP to provide service for all wireless stations within its coverage. WDS Repeater Mode Internet WDAP-C7200AC Clients 2.4G 5G WDS Switch 5GHz Wireless Basic Settings – WDS+AP...
Page 61
User Manual of WDAP-C7200AC feature can be used to extend your existing 2.4G or 5G wireless network coverage. Here we present you how to configure such feature in 2.4GHz, which also applies to 5GHz. WDS Repeater Mode Internet WDAP-C7200AC Clients 2.4G...
Page 70
User Manual of WDAP-C7200AC AP(Multi-SSID) Mode WDAP-C7200AC Internet SSID-1(5G) Clients SSID-2(2.4G) AP Mode Clients 2.4GHz Wireless Basic Settings – AP The page includes the following fields: Check the box to disable the wireless function.