Table of Contents
Advertisement
The page includes the following fields:
Object
Wi-Fi Status
SSID
Hide WiFi SSID?
Wireless Mode
Channel
Encryption
Password
Max Station
TX Power
Wi-Fi Analyzer
5.5.1.2.
VAP
Select VAP1~VAP3 to enable virtual AP.
The page includes the following fields:
Object
Enable VAP
Description
Select ON (Blue) or OFF (Gray) to enable or disable wireless LAN.
It is the wireless network name. The default SSID is "PLANET_2.4G"
and "PLANET_5G".
Select check box to hide wireless LAN or not
Select Wi-Fi mode for 802.11a/b/g/n/ac/ax, channel width, "20MHz" or
"40MHz" or "80MHz".
It shows the channel of the CPE. Default 2.4GHz is channel 6.and
5GHz is channel 36.
Select the wireless encryption. The default is "None".
Enter the password of Wi-Fi
Enter the Max. wireless client of Wi-Fi radio
The range of transmit power is Max (100%), Efficient (75%),
Enhanced (50%), Standard (25%) or Min (12.5%). In case of
shortening the distance and the coverage of the wireless network,
input a smaller value to reduce the radio transmission power.
Press this button to analyze local area wireless signal.
Figure 5-15 VAP
Description
Select check box to enable the virtual AP
-40-
User Manual of WDAP-C1800AX
Advertisement
Table of Contents
