Table of Contents
Advertisement
Installation
Power supply and fuse
Power supply and fuse
Before turn ON the E5091A, check the following.
Checking the supply of power
Check that the power supplied to the E5091A satisfies the following conditions.
Table 1-7
Voltage
Frequency
Power consumption
Use the fuse that meets the following specifications.
UL/CSA type, Slo-Blo, 5×20 mm miniature fuse, 3A 250V (Agilent part number:
2110-1017)
Spare fuses are available from Agilent Technologies sales office. To check or replace the
fuse, disconnect the power cable and pull out the fuse holder.
Figure 1-7
Fuse holder and power cable inlet
20
Condition
90 to 132 Vac or 198 to 264 Vac
47 to 63 Hz
Max. 150 VA
E5091A
*1.The
automatically switches between them depending on the voltage.
Setting up fuse
*1
1
Advertisement
Table of Contents
