Machine Does Not Print - Ricoh B3058637 Operating Instructions Manual

Machine Does not Print

If machine does not print, the table below.
Possible Cause
Is the power on?
Is the interface cable prop-
erly connected?
Are you using the correct
interface cable?
Did you connect the inter-
face cable after turning on
the main switch?
Is your machine online?
Is the specified paper set?
Are there any error messag-
es on the panel display?
Does the indicator above
the Printer key stay red?
Can you print a test page
(configuration page)?
Is your specified paper size
correct?
Solutions
Turn on the machine.
Connect the interface cable correctly.
If there are any connectors or screws, make sure they are
fastened securely.
Be sure to use the correct one. If the cable is damaged or
worn, replace it with a new one.
Make sure to connect the interface cable before turning
on the main switch.
Bring it online by touching the [Online] key.
Set the specified paper in any of the input trays.
Check the error message, and take the required action.
See P.43 "Error & Status Messages on the Operation Panel"
Check the error message, and take the required action.
See P.43 "Error & Status Messages on the Operation Panel"
If you can't print a test page, it probably indicates a
printer malfunction. You should contact your sales or
service representative.
If you can print a test page but cannot get the printer to
print when you issue a print command from your com-
puter, it probably means there is a problem with your
computer.
Also keep it in mind that large, complex data might take
long time for the printing process. ⇒ P.66 "Printer Con-
dition"
Set the specified paper in any of the input trays.
Adjust the paper size dial to match the size and feed di-
rection of the paper in the paper tray.
Machine Does not Print
6
51