Table of Contents
Advertisement
F
If you use TCP/IP, you should as-
sign the IP Address to your print-
er.
Note
To get the IP Address for your
printer, contact your network
administrator.
If you use TCP/IP, you must as-
sign an IP Address to your
printer.
The IP Address is show by Byte
on the panel display.
A Press [↑][↓] until the following
message appears.
B Press [Enter #].
The current Byte 1 of the IP Ad-
dress appears on the panel dis-
play.
C Use [↑][↓] to specify the IP Ad-
dress.
Configuring the Printer for the Network with the Operation Panel
D Press [Enter #].
The current Byte 2 of the IP Ad-
dress appears.
E Use [↑][↓] to specify the Byte 2
of the IP Address.
Repeat step C and D to specify
the rest of the IP Address.
F Press [Enter #] to register the IP
Address you specified.
G
If you use TCP/IP, you should as-
sign the "Subnet Mask" and
"Gateway Address" using the
same procedure for specifying the
IP Address.
THYS850E
H
If you use TCP/IP, set the "Access
Control" and "Access Mask" us-
ing the same procedure for speci-
fying the IP Address, if necessary.
2
THYS620E
13
Advertisement
Table of Contents
