Speakers; Removing The Speakers - Dell Vostro 14 5415 Service Manual

Hide thumbs Also See for Vostro 14 5415:

Table of Contents

Steps

1. Align the ports on the I/O board to the slots on the palm-rest and keyboard assembly.

2. Place the I/O board on the palm-rest and keyboard assembly.

3. Align the screw hole on the I/O board to the screw hole on the palm-rest and keyboard assembly.

4. Replace the screw (M2x3) that secures the I/O board to the palm-rest and keyboard assembly.

5. Connect the I/O-board cable to the connector on the I/O board and close the latch.

6. Connect the power-button with fingerprint-reader cable to the connector on the I/O board and close the latch.

NOTE:

This step is only applicable for computers shipped with the optional fingerprint reader.

7. Connect the coin-cell battery cable to the I/O board.

Next steps

1. Install the

network-port

2. Install the

base

cover.

3. Follow the procedure in

Speakers

Prerequisites

1. Follow the procedure in

2. Remove the

base

cover.

3. Remove the

3-cell battery

bracket.

After working inside your

Before working inside your

or the

4-cell

battery, whichever applicable.

computer.

Removing and installing components

Table of Contents

P143g