Steps
1. Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly.
2. Replace the five screws (M2x3) that secure the battery to the palm-rest and keyboard assembly.
3. Connect the battery cable to the system board.
4. Adhere the tape that secures the battery cable to the 4-cell battery.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Memory module
Removing the memory
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image(s) indicate the location of the memory and provides a visual representation of the removal procedure.
20
Removing and installing components
After working inside your
Before working inside your
computer.
computer.