Steps
1. Place the network-port bracket on the I/O board.
2. Align the screw holes on the network-port bracket to the screw holes on the I/O board.
3. Replace the two screws (M2x5) that secure the network-port bracket to the I/O board.
4. Close the left-display hinge and align the screw holes on the left-display hinge with the screw holes on the I/O board.
5. Replace the two screws (M2.5x5) that secure the left-display hinge to the palm-rest and keyboard assembly.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
I/O board
Removing the I/O board
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
network-port
About this task
The following image(s) indicate the location of the I/O board and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
bracket.
computer.
computer.
Removing and installing components
37