Table of Contents
Advertisement
Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Topics:
•
Recommended tools
•
Screw list
•
Major components of Vostro 14 5415
•
Base cover
•
Battery
•
Memory module
•
Solid-state drive
•
Wireless card
•
Fan
•
Coin-cell battery
•
Heat sink
•
Network-port bracket
•
I/O board
•
Speakers
•
Touchpad
•
Display assembly
•
Power button with optional fingerprint reader
•
Power-adapter port
•
System board
•
Palm-rest and keyboard assembly
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Phillips screwdriver #1
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
10
Removing and installing components
2
Advertisement
Table of Contents
