Adapter Cables; 1/8" Mini-Phone To 1/4" Adapters; Cinch (Rca) To 1/4" Adapters; Digital Cables - E-Mu 1212M Owner's Manual

Adapter Cables

1/8" Mini-phone to 1/4" Adapters

To connect headphones with an 1/8" (mini-phone) plug to the headphone jack on the
MicroDock, you need a 1/8" to 1/4" adapter. These handy devices are available at
electronic department stores everywhere.
Headphones with
1/8" plug

Cinch (RCA) to 1/4" Adapters

Equipment (such as consumer audio gear) which uses Cinch/RCA type connectors can
be connected to the MicroDock using readily available adapter cables. These adapters
can be found at most stores that sell audio equipment.
Cinch/RC A
Plug
Tip = Hot (+)
Sleeve = Ground

Digital Cables

Don't cheap out! Use high quality optical fiber Toslink (ADAT) cables. It's also a good
idea to keep digital cabling as short as possible (1.5 meters for plastic light pipes; 5
meters for high quality glass fiber light pipes).
Use low-capacitance, video-grade cable for coaxial S/PDIF to avoid data corruption.

AES/EBU to S/PDIF Cable Adapter

This simple adapter cable allows you to receive AES/EBU digital audio via the S/PDIF
input on the E-MU 1010 PCI card. This cable may also work to connect S/PDIF out
from the 1010 PCI card to the AES/EBU input of other digital equipment.
From AES/EBU
Device
+
1 2
N.C.
3
-
E-MU PCI Digital Audio Systems
1/8" to 1/4"
Headphone Adapt er
1/4" Phone Plug
To S/PDIF
In
Shaft = Ground
Tip = Hot (+)
6 - Appendix
Useful Information
97