E-Mu 1212M Owner's Manual page 101

Specifications: 1616
Signal-To-Noise Ratio:
THD+N:
Frequency Response:
Phantom Power:
Soft Limiter:
HEADPHONE AMP
D/A Converter:
Gain Range:
Maximum Output Power:
Output Impedance:
Frequency Response:
Dynamic Range:
Signal-To-Noise Ratio:
THD+N:
Stereo Crosstalk:
PHONO INPUT
Maximum Level:
Input Impedance:
Frequency Response:
Dynamic Range:
Signal-To-Noise Ratio:
THD+N:
Stereo Crosstalk:
Deviation from RIAA
Input Capacitance:
DIGITAL I/O
S/PDIF
E-MU PCI Digital Audio Systems
m
PCI System
(A-weighted, min. gain): 119 dB
(1kHz at -1dBFS, min gain): -110dB (.0003%)
(20Hz - 20kHz, gain +40dB): ±0.08 dB
+48V
5dB max compression (software selectable)
Linear power amplifier
CS4398
85 dB
50 mW
22 ohms
(20Hz - 20kHz): +0.0/-0.07 dB
(A-weighted): 118.5 dB
(A-weighted): 118 dB
(1kHz, max. gain, 600 ohm load): -96 dB (0.0015%)
(1kHz at -1dBFS, 600 ohm load): < -100 dB
RIAA equalized phono input
Professional: 60 mV RMS
Consumer: 15 mV RMS
47K ohm
(20 Hz - 20 kHz): +0.1/-0.3 dB
(A-weighted): 96 dB
(15mV RMS unbalanced input, A-weighted): 96 dB
(1kHz, 15 mV RMS input): -90 dB (.003%)
(1kHz at -1dBFS): < -80 dB
+0.2/-0.3 dB (50Hz to 15kHz)
220 pF
• 2 in/2 out coaxial (transformer coupled)
• 2 in/2 out optical (software switchable with ADAT)
• AES/EBU or S/PDIF (switchable under software
control)
6 - Appendix
Technical Specifications
101