E-Mu 1212M Owner's Manual page 105

Specifications: 1616 PCI System
Phantom Power:
Soft Limiter:
HEADPHONE AMP
D/A Converter:
Gain Range:
Maximum Output Power:
Output Impedance:
Frequency Response:
Dynamic Range:
Signal-To-Noise Ratio:
THD+N:
PHONO INPUT
Maximum Level:
Input Impedance:
Frequency Response:
Dynamic Range:
Signal-To-Noise Ratio:
THD+N:
Stereo Crosstalk:
Deviation from RIAA
Input Capacitance:
DIGITAL I/O
S/PDIF
ADAT
MIDI
SYNCHRONIZATION
E-MU PCI Digital Audio Systems
+48V
5dB max compression (software selectable)
Linear power amplifier
CS4392
85 dB
50 mW
22 ohms
(20Hz - 20kHz): +0.0/-0.07 dB
(A-weighted): 112 dB
(A-weighted): 112 dB
(1kHz, max. gain, 600 ohm load): -92 dB (0.0025%)
RIAA equalized phono input
Professional: 60 mV RMS
Consumer: 15 mV RMS
47K ohm
(20 Hz - 20 kHz): +0.1/-0.3 dB
(A-weighted): 96 dB
(15mV RMS unbalanced input, A-weighted): 96 dB
(1kHz, 15 mV RMS input): -88 dB (.004%)
(1kHz at -1dBFS): < -80 dB
+0.2/-0.3 dB (50Hz to 15kHz)
220 pF
• 2 in/2 out coaxial (transformer coupled)
• 2 in/2 out optical (software switchable with ADAT)
• AES/EBU or S/PDIF (switchable under software
control)
• 8 channels, 24-bit @ 44.1/48 kHz
• 4 channels, 24-bit @ 96 kHz (S-MUX compatible)
• 2 channels, 24-bit @ 192 kHz
2 MIDI in, 2 MIDI out
6 - Appendix
Technical Specifications
105