E-Mu 1212M Owner's Manual page 107

Specifications: 1212
Frequency Response
Dynamic Range
Signal-to-Noise Ratio
THD + N
Channel Crosstalk
Input Impedance
ANALOG LINE OUTPUTS
Type
D/A Converter
Level (software selectable)
Frequency Response
Dynamic Range
Signal-To-Noise Ratio
THD + N
Stereo Crosstalk
Output Impedance
DIGITAL I/O
S/PDIF
ADAT
MIDI
E-MU PCI Digital Audio Systems
m
System
(20Hz - 20kHz): +/- 0.05 db
(1kHz, A-weighted): 120 dB
(A-weighted): 120 dB
(1kHz at -1dBFS): -110 dB (.0003%)
(1kHz at -1dBFS): -115 dB
10K ohm
(2)
Balanced, low-noise, 3-pole low-pass differential filter,
AC-coupled
CS4398
Professional: +4dBu nominal, 20 dBu maximum
(balanced)
Consumer: -10 dBV nominal, 6 dBV maximum (unbal-
anced)
(20 Hz - 20 kHz): +0.0/-0.35 dB
(1kHz, A-weighted): 120 dB
(A-weighted): 120 dB
(1kHz at -1dBFS): -105 dB (.0006%)
(1kHz at -1dBFS): < -115 dB
560 ohms
• 2 in/2 out coaxial (transformer coupled)
• 2 in/3 out optical (software switchable with ADAT)
• AES/EBU or S/PDIF (switchable under software
control)
• 8 channels, 24-bit @ 44.1/48 kHz
• 4 channels, 24-bit @ 96 kHz (S-MUX compatible)
• 2 channels, 24-bit @ 192 kHz
1 MIDI in, 1 MIDI out (16 channels)
6 - Appendix
Technical Specifications
107