E-Mu 1212M Owner's Manual page 25

5.1 Surround Speaker Connections
Left
Front
Left
Rear
Sub-Woofer
(with built-in power amps)
The 1/8" stereo jacks make it easy to connect to powered surround sound speakers.
Only three stereo cables are necessary with many speaker systems (see above). The 1/8"
jacks duplicate the 1/4" outputs.
You can connect the 1/8" stereo jacks to your surround speakers and connect the 1/4"
outputs to your other gear for music creation. When you want to monitor in surround,
simply open the 5.1 Session and turn on your surround speakers.
The chart below shows how to connect the outputs for 5.1 surround sound playback.
Multichannel WAVE to Surround Sound Speaker Channels
(using the factory 5.1 DVD Playback Session)
WAVE Strip Surround Channels
E-DSP WAVE 1/2 Front Left/Front Right 1L = FL 1R = FR
E-DSP WAVE 3/4 Center/Subwoofer
E-DSP WAVE 5/6 Rear Left/Rear Right
E-DSP WAVE 7/8 Side Left/Side Right
E-MU PCI Digital Audio Systems
1L 2L 2R
1R
In
Out
1L 1R 2L 2R
1/4" Outputs
3L = C 3R = Sub
2L = RL 2R = RR
N/A
Center
Phono
MIDI Cable
2L 2R
Gnd
Out
1 2 3
3L 3R
Front Rear Ctr/Sub
1/8" Outputs
1 (Tip = FL Ring = FR)
3 (Tip = C Ring = Sub)
2 (Tip = RL Ring = RR)
N/A
3 - PCI Card & Interfaces
The MicroDock
Right
48 VDC
Front
+ -
EDI
Right
Rear
25