To Perform An Advanced Search - Canon imagePRESS Server В5000 Manual

Configuring Fiery Remote Scan
When you open Fiery Remote Scan for the first time, you must configure the connection to the imagePRESS Server.
You can add more than one imagePRESS Server to the Fiery Server list in Fiery Remote Scan and select the required
one from the list.
To configure the connection, you need the name or IP address of the imagePRESS Server. If you do not have the
name or IP address, use the Search function to find the imagePRESS Server on your network.
After first use, Fiery Remote Scan automatically attempts to connect to the last imagePRESS Server used in the
previous session. You can immediately start to initiate a scan, retrieve any scans initiated at the printer control panel,
and use Fiery Remote Scan Help.
Instructions for configuring and modifying the connection to the imagePRESS Server are also provided in Fiery
Remote Scan Help.
1 Open Fiery Remote Scan.
2 Click the Choose a Fiery icon (magnifying glass) to open the Connect to Server dialog box.
3 Type the name or IP address in the Connect to a server field.
If you do not have the name or IP address, see
4 Click the plus sign icon to add it to the server list.
When you click the plus sign, you add the imagePRESS Server to the list, but do not connect to it. This operation
is useful when you want to add more than one imagePRESS Server in a session. You can then switch between any
imagePRESS Server in the Fiery Remote Scan window without opening the Connect to Server dialog box.
5 Click Connect or Cancel.
Clicking Connect adds the imagePRESS Server to the list at the same time as connecting to it. If the connection
was successful, the Fiery Remote Scan window opens.
If you clicked Cancel, all operations that you did to add or remove the imagePRESS Server are cancelled. Any
server list changes are discarded.
If you do not have the specific name or IP address of the imagePRESS Server, you can search by IP ranges or by
subnet.

To perform an advanced search

You can search for a imagePRESS Server in different ways.
1 In the Connect to Server dialog box, click the Choose a Fiery icon (magnifying glass) to open the Search dialog
box.
2 Select Auto Search or select IP Range or Subnet to specify the range to search, and then click Go.
Any available imagePRESS Server that matches the search criteria is shown. You can filter the search result list by
typing a keyword in the Filter by keyword field.
3 Select the imagePRESS Server from the results list and click Add.
4 To add another imagePRESS Server to the list for later use, click the plus sign in the Connect to Server dialog box.
To perform an advanced search
Utilities
on page 35.
35
Scan