Lexus RX450hL Manual page 76

76
2-4. Other settings
a destination. (P.98)
Editing dealer or contact name
1
Select "Dealer" or "Contact".
2
Enter the name and select "OK".
Editing the location
1
Select "Location".
2
Scroll the map to the desired point
(P.83) and select "Enter".
Editing phone number
1 Select "Phone #".
2
Enter the phone number and select
"OK".
Setting the valet mode
The security system can be set to on by
entering a security code (4-digit num-
ber).
When set to on, the system will
become inoperative once the electri-
cal power source is disconnected until
the security code is entered.
1
Display the vehicle settings screen:
 "MENU" button  "Setup"
"Vehicle"

2
Select "Valet Mode".
3 Enter the 4-digit personal code and
select "OK".
4
Enter the same 4-digit personal
code again and select "OK".
 The system will request that you
input the security code again to
confirm that you remember it cor-
rectly.
 When valet mode activates, the sys-
tem stops and a security code
(4-digit number) standby screen is
displayed.
● If the 4-digit personal code is forgotten,
please contact your Lexus dealer.
If the valet mode has been acti-
vated
1
Enter the 4-digit personal code and
select "OK".
● If an incorrect security code (4-digit
number) is entered 6 times, the system
will not accept another security code
(4-digit number) for 10 minutes.
Setting dealer information
*
: Without navigation function. This func-
tion is not available in some countries or
areas.
Dealer information can be registered
in the system. If the vehicle alert screen
is displayed, selecting the call dealer
button on the screen will call the phone
number registered in the dealer infor-
mation.
1
Display the vehicle settings screen:
 "MENU" button  "Setup"
"Vehicle"

2
Select "Dealer Info".
*