8-1. Phone operation (Hands-free system for cellular phones)
Select to reply to the message.
A
(P.265)
Select to display the previous or
B
next message.
Select to have messages read out.
C
To cancel this function, select
When "Automatic Message Read-
out" is set to on, messages will be
automatically read out. (P.276)
Select to call the message sender.
D
●
Depending on the type of Bluetooth
phone being connected, this function
cannot be used.
●
Depending on the type of Bluetooth
phone being connected, it may be neces-
sary to perform additional steps on the
phone.
Messages are displayed in the appropri-
●
ate connected Bluetooth
tered mail address folder. Select the
desired folder to be displayed.
●
Only received messages on the con-
®
nected Bluetooth
phone can be dis-
played.
●
The text of the message is not displayed
while driving.
Turn the "PWR•VOL" knob, or use the
●
volume control switch on the steering
wheel to adjust the message read out vol-
ume.
●
"Subject:" field is not shown on SMS case.
E-mail only: Select "Mark Unread" or
●
"Mark Read" to mark mail unread or read
on the message screen.
This function is available when "Update
Message Read Status on Phone" is set to
on. (P.276)
Replying to a message (dictation
reply)
1
Display the message screen:
"MENU" button "Phone"
.
2
Select a desired account name that
is displayed on the left side of
screen.
3
Select the desired message from
the list.
®
4
Select "Reply".
5
Select "Dictation".
®
6
When the "Say Your Message"
screen is displayed, speak mes-
sage that you want to send.
7
Select "Send" to send message.
®
phone's regis-
"Cancel": Select to cancel sending the
message.
"Retry": Select to retry speaking message
that you want to send.
While the message is being sent, a
sending message screen is dis-
played.
8
Check that a confirmation screen is
displayed when the operation is
complete.
If an error message is displayed, fol-
low the guidance on the screen to
try again.
"Message"
265
8