Checking The Sides Of The Vehicle - Lexus RX450hL Manual

222
7-2. Panoramic view monitor

Checking the sides of the vehicle

The Side Clearance View & panoramic view screen/Cornering View & pan-
oramic view screen provide support to check the areas around the sides of the
vehicle when driving on a narrow road.
To display the Side Clearance View & panoramic view screen, press the cam-
era switch repeatedly when the shift lever is in the "N" or "D" position with the
vehicle moving approximately 7 mph (12 km/h) or less.
The Cornering View & panoramic view screen will be displayed when the
steering wheel is turned by 180° or more from the center (straight-line) posi-
tion when automatic display mode of the Cornering View display is enabled.
When the turning angle of the steering wheel becomes 45° or less from the
center position, the screen will return to the Side Clearance View & pan-
oramic view screen.
Screen display
Side Clearance View & panoramic view

Distance guide lines
A
Show distance in front of the vehicle.
• Display points approximately 3 ft. (1 m) from the edge of the vehicle.
Vehicle width guide lines
B
Shows guide lines of the vehicle's width including the outside rear view mirrors.
Front tire guide lines
C
Shows guide lines of where the front tire touches the ground.