272
8-2. Setup
6
Select a phone type for the phone
number.
*
: For PBAP compatible Bluetooth
phones, this function is available when
"Automatic Transfer" is set to off.
(P.271)
Transfer contacts from device
When an Android Auto connection is
established, this function will be
*
unavailable.
*
: This function is not available in some
countries or areas.
From phone (OPP compatible Blue-
®
tooth
phones only)
When the contact is not registered
1
Select "Transfer Contacts from
Device".
2
Select "From Phone (Bluetooth)".
3
Transfer the contact data to the sys-
tem using a Bluetooth
This operation may be unnecessary
depending on the type of Blue-
®
tooth
phone.
To cancel this function, select "Can-
cel".
4
Check that a confirmation screen is
displayed when the operation is
complete.
When the contact is registered
1
Select "Transfer Contacts from
Device".
2
Select "From Phone (Bluetooth)".
3
Select "Replace Contacts" or "Add
Contact".
"Replace Contacts": Select to transfer the
®
contact from the connected cellular phone
and replace the current one.
"Add Contact": Select to transfer the
desired contact data from the connected
cellular phone to add to the current one.
4
Transfer the contact data to the sys-
tem using a Bluetooth
This operation may be unnecessary
depending on the type of Blue-
tooth
To cancel this function, select "Can-
cel".
5
Check that a confirmation screen is
displayed when the operation is
complete.
From USB device
Backed-up contact data ("vCard" for-
matted) can be transferred from USB
device or Bluetooth
®
phone.
system.
1
Push the knob.
Lift by hand to fully open the console
box.
®
phone.
®
phone.
®
phone to this