Things you should know
If you notice any symptoms
If you notice any of the following symptoms, refer to the likely cause and the solu-
tion, and re-check.
If the symptom is not resolved by the solution, have the vehicle inspected by your
Lexus dealer.
Symptom
The image is difficult to see
The image is blurry
The image is out of alignment
7-2. Panoramic view monitor
Likely cause
The vehicle is in a dark
area
The temperature around
the lens is either high or
low
The outside temperature is
low
There are water droplets
on the camera
It is raining or humid
Foreign matter (mud, etc.)
is adhering to the camera
Sunlight or headlights are
shining directly into the
camera
The vehicle is under fluo-
rescent lights, sodium
lights, mercury lights, etc.
Dirt or foreign matter (such
as water droplets, snow, mud,
etc.) is adhering to the cam-
era.
The camera or surrounding
area has received a strong
impact.
247
Solution
Back up while visually check-
ing the vehicle's surround-
ings. (Use the monitor again
once conditions have been
improved.)
The procedure for adjusting
the picture quality of the pan-
oramic view monitor system
is the same as the procedure
for adjusting the screen dis-
play. (P.70)
Flush the camera with a large
quantity of water and wipe
the camera lens clean with a
soft and wet cloth.
Have the vehicle inspected
by your Lexus dealer.
7