Lexus RX450hL Manual page 112

112
3-4. Setup
Registering areas to avoid
1
Press the button on the Remote
Touch, and then select "Add New".
2 Select "Recent Destina-
tions"(P.93) or "Current Loca-
tion" to search for the location.
3
Select "+" or "-" to change the size
of the area to be avoided and select
"OK".
4
Select "OK" when the area to avoid
screen appears.
If a destination is entered in the area to
●
avoid or the route calculation cannot be
made without running through the area
to avoid, a route passing through the area
to be avoided may be shown.
● Up to 10 locations can be registered as
points/areas to avoid.
Editing areas to avoid
The name, location and/or area size of
a registered area can be edited.
1 Select the desired area.
2 Select the desired item to be
edited.
Select to edit the name of the area
A
to avoid.
Select to edit area location.
B
Select to edit area size.
C
Select to set the area to avoid func-
D
tion on/off.
Select to set display of the area to
E
avoid name on/off.
Select to delete areas to avoid.
F
3
Select "OK".