Auto Shut-Off Function; Anti-Drip System; Built-In Anti-Scale System - Singer SteamLogic Plus Instruction Manual

AUTO SHUT-OFF FUNCTION

The Auto Shut-Off function operates automatically when the iron is left untouched for 30
seconds (horizontal position) or 30 minutes (vertical position).
To reactivate the iron, simply move it or press the Temperature Set Button. The Control
Panel will return to the temperature setting it was on when Auto Shut-Off engaged and the
iron will begin heating up. It may take up to 60 seconds for the iron to be ready for use.
IMPORTANT: ALWAYS disconnect your iron from the electrical outlet after use. NEVER
leave the iron unattended with Auto Shut- Off in operation.
DRAIN THE WATER TANK
1. Switch off the Iron.
2. Unplug Power Cord from the electrical outlet.
3. Open the Water Tank Door and drain the Water Tank.
4. Close the Water Tank Door.

BUILT-IN ANTI-SCALE SYSTEM

The built-in Anti-Scale System is designed to reduce the build-up of lime scale which
occurs during steam ironing. This will prolong the working life of your iron.
NOTE: The anti-scale cartridge will not completely stop the natural process of lime scale
build-up.
8 – ENGLISH
Using Your SteamLogic Plus
Steam Iron

ANTI-DRIP SYSTEM

The anti-drip system is designed to auto-
matically prevent water from escaping through the
soleplate when the iron is cold. During use, a "click"
sound may be heard from the anti-drip system, par-
ticularly during heat-up or while cooling down. This
is normal and indicates that the system is function-
ing correctly.