Auto Switch Off; Cleaning And Maintenance; Descaling Process - Singer Comfort Steam Care Instruction Manual

1. Press the energy saving button "Eco" (4). The indicator light will come on.
2. To switch back to the normal energy setting, press the "Eco" button again. It
is advisable to use the normal energy setting to get optimum results on thick
and very wrinkled fabrics.

5. Auto switch off

For your safety and to save energy, the appliance switches off automatically
when it has not been used for 8 minutes.
Three beeps will be heard, and all indicator lights (1,2,3,4) will fl ash.
1. T o switch the steam station back on, press the steam release button (14)
again.
CLEANING & MAINTENANCE

1. Descaling process

Important: to keep your appliance in good condition for a long time,
you should carry out the descaling process after a period of use. The
"Calc'nClean" indicator light (2) will fl ash and three beeps will be heard,
indicating that the process should be performed. You may continue
ironing, but before the next use, while the appliance is cold, a descaling
process should be performed.
Descaling the boiler
1. Take special care to ensure that the appliance is cold and unplugged.
2. Empty the water tank.
3. Remove the iron from the pad (12).
4. Unscrew and remove the boiler cap (8) and take it out. Empty the boiler
completely.
5. Fill the boiler with approximately 300 ml of tap water. Close the boiler cap
and shake the base unit for a few moments. Then, empty it completely.
Important: To obtain the best result, we recommend that this operation be
performed twice. Before re-closing, make sure no water remains in the boiler.
6. If your appliance is equipped with scale collector (8*), it must be washed
(see the "Descaling the scale collector" section).
7. Replace and tighten up the cap.
8
ENGLISH