General Information; Wiring Diagram - Pioneer PRO-700HD Service Manual

PRO-700HD

7. GENERAL INFORMATION

7.1 WIRING DIAGRAM

Reconnect any disconnected lead wires of the Projection monitor
receiver.
The important points for connection of the lead wires are as
shown below.
You may find that they were connected differently. Be sure
reconnect the lead wires as they were.
Note:
A: FBT focus wire and other parts should be at least 15mm away
from any other parts.
B: Loop with a radius of 30mm or omre.
C: The anode cable and other parts should be at least 15mm away
from any other parts.
D: Loop with a radius of 50mm or more.
B
C
214
D
C
A
FBT
focus wire
FBT
Binder
A
FBT
focus wire
Binder