HP Proliant ML150 G6 Maintenance And Service Manual page 65

All manuals and user guides at all-guides.com
To replace the rear fan assembly:
Secure the rear fan to the chassis with two screws. (Figure 3-44, 1).
1.
Connect the fan cable to the system board connector. (Figure 3-44, 2)
2.
Slide the fan assembly toward the expansion slots until it snaps into place.
3.
Figure 3-394 Installing a rear system fan
Replace the air baffle.
4.
Replace the access panel and reconnect the power cord(s).
5.
End of procedure.
Removal and replacement procedures 65