HP Proliant ML150 G6 Maintenance And Service Manual page 45

All manuals and user guides at all-guides.com
Using the processor removal tool, remove the processor from the system board:
2.
Line up the processor tool, ensuring the locking lever graphic on the tool is correctly oriented.
a.
Press in on the plastic tabs, and then place the tool on the processor.
b.
Release the tabs, and then carefully lift the processor and tool straight up.
c.
Figure 3-22 Removing the processor
Carefully rotate the tool, and then push in and release the tabs to secure the processor in the
3.
tool.
Figure 3-23 Securing the processor
CAUTION: To avoid damage to the processor, do not touch the bottom of the processor, especially
the contact area.
Removal and replacement procedures 45