HP Proliant ML150 G6 Maintenance And Service Manual page 49

All manuals and user guides at all-guides.com
Figure 3-26 Removing the processor installation tool
Close the processor socket retaining bracket and the processor locking lever.
4.
CAUTION: Be sure to close the processor socket retaining bracket before closing the processor
locking lever. The lever should close without resistance. Forcing the lever closed can damage the
processor and socket, requiring system board replacement.
Figure 3-27 Closing the processor socket retaining bracket
CAUTION: To allow the heatsink to draw as much heat as possible from the processor base, there
must be good contact between the heatsink base and the top of the processor. To ensure good
contact, you must apply thermal interface material.
Removal and replacement procedures 49