Enhanced Stacking, To Maintain Order In Output Stack; Lightweight Paper; Ncr Paper; Scanning Small Items - Kodak S2000 Series User Manual

3 Scanning

Enhanced stacking, to maintain order in output stack

Lightweight paper

NCR paper

Scanning small items

32
Using the tilt stand may be especially helpful with enhanced stacking.
To enable enhanced stacking, refer to the TWAIN or ISIS driver help or
set-up guides. Set-up guides are available on the support page for your
model. For a list of support page links, see "Active Feeding" on
page 31.
Straighten the stack of input paper, then fan pages, before placing them
in the feeder, lead edge first.
Do not push lightweight paper too far into the input tray. The scanner
needs to detect the pages, but pushing too far may crumple delicate
paper.
For pages less than 7.2 lb/27 gm
to the TWAIN Settings > Device - Transport tab).
"No carbon required" (NCR) paper is coated with chemicals that affect
the scanner rollers and can degrade scanner feeding performance.
After scanning NCR paper you should clean the scanner. See
"Cleaning procedures" on page 40.
If you are scanning small items such as a driver's license or credit card
— especially hard cards that are relatively thick — they should be
scanned with the embossed side up and ideally one at a time. You may
need to assist them by hand.
One card may be scanned first in a batch with larger pages.
Feed hard cards in landscape orientation.
2
weight, set Active Feed to None (go
A-61931 April 2021