Adjusting Trimmer For User; Adjusting Shaft Angle; Adjusting Length Of Shaft; Adjusting The Loop Handle - Stihl FSA 45 Instruction Manual

English
1
► Position the loop handle (2) so that the recess for the star
knob nut (1) is on the right – viewed from the control
handle.
► Ease the ends of the loop handle (2) apart and push it onto
the control handle until it engages in position.
► Insert the screw (3) through the hole.
► Fit the star knob nut (1) and tighten it down.
The loop handle (2) must not be removed again.

8 Adjusting Trimmer for User

8.1

Adjusting Shaft Angle

The shaft angle can be adjusted to suit the height and reach
of the user.
► Switch off the trimmer and remove the activation key.
B
C
D
16
2
3
A
2
1
► Depress the lever (1) and hold it in that position.
► Move shaft (2) to the required position (A to D) until it
engages.
► Release the lever (1).
8.2

Adjusting Length of Shaft

The length of the shaft can be adjusted to suit the height and
reach of the user.
► Switch off the trimmer and remove the activation key.
► Hold the shaft firmly.
1
► Depress lock button (1) and hold it in that position.
► Pull or push the control handle (2) to the required position.
► Release the lock button (1).
► Move the control handle (2) back and forth until it
engages.
8.3

Adjusting the Loop Handle

The loop handle can be set in different positions to suit the
height and reach of the user.
► Switch off the trimmer and remove the activation key.
8 Adjusting Trimmer for User
2
0458-718-0121-B