Specifications; Stihl Fsa 45 Trimmer; Stihl Lk 45 Charging Cable; Noise And Vibration Data - Stihl FSA 45 Instruction Manual

Hide thumbs Also See for FSA 45:
Table of Contents

Advertisement

19 Specifications

19 Specifications

19.1 STIHL FSA 45 Trimmer

– Weight with cutting attachment and deflector: 2.3 kg
– Length: 1100 mm up to 1310 mm
– Battery technology: Lithium-ion
– Voltage: 18 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Permissible temperature range for operation and storage:
0°C up to +50°C
If the trimmer is used at temperatures higher than +30°C the
battery runtime may be shortened and the trimmer's
performance reduced.
For battery life see www.stihl.com/battery-life.

19.2 STIHL LK 45 Charging Cable

– Voltage: 100-240 V, 50--60 Hz
– Power rating: 14.6 W
– Charge current: 0.65 A
– Permissible temperature range for operation and storage:
0°C up to 40 °C
For charging times see www.stihl.com/charging-times.

19.3 Noise and Vibration Data

K-value for sound pressure level is 2 dB(A). K-value for
sound power level is 2 dB(A). K-value for vibration level is
2 m/s².
0458-718-0121-B
STIHL recommends that you wear hearing protection.
STIHL FSA 45 with PolyCut 2-2 mowing head equipped with
1.6 mm diameter "round, quiet" nylon line
– Sound pressure level L
pA
EN 50636-2-91: 80 dB(A)
– Sound power level L
measured according to EN 50636-
wA
2-91: 94 dB(A)
STIHL FSA 45 with PolyCut 2-2 and cutting blades
– Sound pressure level L
pA
EN 50636-2-91: 77 dB(A)
– Sound power level L
measured according to EN 50636-
wA
2-91: 87 dB(A)
– Vibration level a
measured according to EN 50636291
hv
– Control handle: < 4.9 m/s²
– Loop handle: 1.7 m/s²
The vibration values quoted above have been measured
according to a standardized test procedure and may be used
to compare electric power tools. Depending on the type of
usage, the vibrations that actually occur may differ from the
values quoted. The vibration values quoted may be used for
an initial assessment of the user's exposure to vibrations.
The actual exposure to vibrations has to be estimated. This
process may also take into account times during which the
electric power tool is switched off and times during which it
is switched on but running off load.
Information on compliance with Vibration Directive
2002/44/EC is available at www.stihl.com/vib.

19.4 REACH

REACH is an EC regulation and stands for the Registration,
Evaluation, Authorisation and Restriction of Chemical
substances.
For information on compliance with the REACH regulation
see www.stihl.com/reach.
English
measured according to
measured according to
23

Advertisement

Table of Contents
loading

Table of Contents