Timer Recording (Tv Guide/Manual/Vcr Plus+) - Sony RDR-HX900 Operating Instructions Manual

Unrecordable pictures
Pictures with copy protection cannot be recorded
on this recorder.
When the recorder receives a copy guard signal,
the recorder continues to record but only a blank,
gray colored screen will be recorded.
Copy control
signals
Copy-Free
Copy-Once
Copy-Never
* The recorded disc can be played only on CPRM
compatible equipment.
Note
Copy-Once programs can not be dubbed (page 73).
46
Recordable discs
+ - RW
RW
HDD
VR
+ -
- RW R R
Video
HDD
(Ver.1.1 with CPRM*)
- RW
VR
None (a blank screen is
recorded)
Timer Recording (TV GUIDE/
Manual/VCR Plus+)
There are three methods to set the timer – setting
the timer using the TV Guide On Screen system,
using VCR Plus+ and setting the timer manually.
Notes
• When the recorder is connected to a cable box and you
want to record using the TV Guide On Screen system,
do the following: Turn on the cable box, connect the set
top box controller, and set "Set Top Box Control" in the
Settings setup to "On."
• Do not operate your cable box or satellite receiver just
before or during a timer recording. This may prevent
the accurate recording of a program.
Recording using the TV Guide On
Screen system (TV GUIDE)
You can use the TV Guide On Screen system to set
the timer to record a program up to eight days in
advance.
Z OPEN/
CLOSE
HDD
1
4
7
[TV GUIDE]
Blue button
1
Press HDD or DVD.
If you select DVD, press Z OPEN/CLOSE
and place a DVD on the disc tray. Press Z
again to close the disc tray.
With the recording side facing down
DVD
2 3
5 6
8 9
0
Green
button
</M/m/,,
ENTER
x REC STOP