Disc And Remote Control Settings/Factory Settings (Options) - Sony RDR-HX900 Operating Instructions Manual

Disc and Remote Control
Settings/Factory Settings
(Options)
The Options Setup allows you to set up other
operational settings.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Options," and press ENTER.
The Options Setup appears with the following
options. The default settings are underlined.
SETUP
Settings Format DVD :
Video Dimmer :
Audio Auto Display :
Features Command Mode :
Options Factory Setup
Easy Setup
Format DVD (DVD-RW only)
The recorder automatically starts formatting in
VR mode or Video mode, whichever is selected
below, when a new, unformatted DVD-RW is
inserted.
VR
Automatically formats the
disc in VR mode.
Video
Automatically formats the
disc in Video mode.
Dimmer
Adjusts the lighting of the front panel display.
Normal
Bright lighting.
Power Low lighting. Turns off the
Save
lighting when the power is
off.
94
VR
Normal
On
DVD3
Auto Display
On
Automatically displays
information on the screen
when the recorder is turned
on, etc.
Off
Displays information only
when DISPLAY is pressed.
Command Mode
Changes the Command Mode of the recorder if
other DVD equipment is assigned the same
Command Mode. Be sure to match the Command
Mode switch on the remote to the setting made
here. For details, see "If you have a Sony DVD
player or more than one Sony DVD recorder" on
page 23.
DVD1
Select this if the default
Command Mode conflicts
with other DVD equipment.
DVD2
Select this if the default
Command Mode conflicts
with other DVD equipment.
DVD3
The default Command Mode
of the recorder.
Factory Setup
Allows you to select the setup settings by group,
and return them to their default settings. Note that
all of your previous settings will be lost.
1
After step 3 above, select "Factory Setup,"
and press , or ENTER.
The display for selecting a group of settings
appears.
2
Select the group of settings you want to return
to default from "Settings," "Video," "Audio,"
"Features," "Options," "Parental Control,"
and "All," and press , or ENTER.
3
Select "Start," and press ENTER.
The selected settings return to their default
settings.
4
Press ENTER when "Finish" appears.