Sony RDR-HX900 Operating Instructions Manual page 90

Audio ATT (attenuation)
If the playback sound is distorted, set this item to
"On." The recorder reduces the audio output level.
This function affects the output of the following
jacks:
– LINE OUT (AUDIO L/R) 1/2 jacks
On
Select this when the
playback sound from the
speakers is distorted.
Off
Normally select this
position.
Audio DRC (Dynamic Range Control) (DVDs
only)
Makes the sound clear when the volume is turned
down when playing a DVD that conforms to
"Audio DRC." This affects the output from the
following jacks:
– LINE OUT (AUDIO L/R) 1/2 jacks
– DIGITAL OUT (OPTICAL or COAXIAL) jack
only when "Dolby Digital" is set to "D-PCM."
Standard
Normally select this
position.
TV Mode Makes low sounds clear
even if you turn the volume
down.
Wide Gives you the feeling of
Range
being at a live performance.
Downmix (DVDs only)
Switches the method for mixing down to two
channels when you play a DVD which has rear
sound elements (channels) or is recorded in Dolby
Digital format. For details on the rear signal
components, see "Checking the Play Information
and Playing Time" (page 41). This function
affects the output of the following jacks:
– LINE OUT (AUDIO L/R) 1/2 jacks
– DIGITAL OUT (OPTICAL or COAXIAL) jack
when "Dolby Digital" is set to "D-PCM."
90
Dolby
Normally select this
Surround
position.
Multi-channel audio signals
are output to two channels
for enjoying surround
sounds.
Normal Multi-channel audio signals
are downmixed to two
channels for use with your
stereo.
Digital Out
Selects if audio signals are output via the
DIGITAL OUT (OPTICAL or COAXIAL) jacks.
On
Normally select this
position. When you select
"On," see "To set the digital
output signal" for further
settings.
Off
The influence of the digital
circuit upon the analog
circuit is minimal.
To set the digital output signal
The following setup items switch the method of
outputting audio signals when you connect a
component such as an amplifier (receiver) with a
digital input jack.
For connection details, see "Connecting the Audio
Cords" (page 19).
Select "Dolby Digital" and "DTS" after setting
"Digital Out" to "On."
SETUP
Settings Auto Stereo :
Video Tuner Audio :
Audio Audio ATT :
Features Audio DRC :
Options Downmix :
Digital Out :
Easy Setup Dolby Digital :
DTS :
On
Main
Off
Standard
Dolby Surround
On
D-PCM
Off