Connecting To The Line 2 In Jacks On The Front Panel - Sony RDR-HX900 Operating Instructions Manual

Dvd players & recorders: dvd recorder
Hide thumbs Also See for RDR-HX900:
Table of Contents

Advertisement

Notes
• When you connect using a component video cord, connect the audio cords to the LINE IN jacks.
• Do not connect a hi-definition tuner or similar device using the component video cords. This recorder only accepts
standard definition interlace signals.

Connecting to the LINE 2 IN jacks on the front panel

Connect a VCR or similar recording device to the LINE 2 IN jacks of this recorder. If the equipment has
an S-video jack, you can use an S-video cord instead of an audio/video cord.
z Hint
When the connected equipment outputs only monaural sound, use audio cables that distribute monaural sounds to left/
right channels (not supplied).
Notes
• Do not connect the yellow LINE IN (VIDEO) jack when using an S-video cord.
• Do not connect the output jack of this recorder to another equipment's input jack with the other equipment's output
jack connected to the input jack of this recorder. Noise (feedback) may result.
• Pictures containing copy protection signals that prohibit any copying cannot be recorded.
30
VCR, etc.
OUTPUT
VIDEO
S VIDEO
S-video
cord (not
supplied)
to LINE 2 IN
: Signal flow
AUDIO
L
R
Audio/video cord
(not supplied)
DVD recorder

Advertisement

Table of Contents
loading

Table of Contents