Passport Talk Group Setting Programming Sub-Screen - Icom IC-F620 Programming Software Manual

When done editing in this programming screen you can proceed to other programming
screens, save your programming parameters to a file or proceed to writing the
information to the radio (assuming that editing has been finished for all other required
programming screens also).
P P T G
ASS ORT ALK ROUP
After the Group ID Start field has been set correctly, double click on the Talk Group field
in the PassPort programming screen to enter the Talk Group Setting programming sub-
screen. Don't be confused, while this screen seems oriented around talk groups, this is
also where MINs (and their MIN aliases) can be entered to use for selective call. The
group tag you give to a MIN here will also act as a "MIN Alias" (meaning when a MIN
from a calling party matches a MIN entered here, its group tag text, rather than the MIN
number, will be displayed).
At the head of this screen is pertinent information concerning the current selected system.
Each line in this screen can be used to enter group or MIN information. Note, to delete a
row, you can right click on almost any field in the programming screen and select
"Delete" from the menu that appears.
CS-F620TR Programming Software Manual
S P
ETTING ROGRAMMING
(rev 1.0) -
S -S
UB CREEN
Mode and System
Indicator
Pertinent Text and Group
Detail from Parent
Programming Screen
Talk Group Setting
Programming Sub-Screen
PassPort Programming Screen
27