Repeater Setting Programming Sub-Screen - Icom IC-F620 Programming Software Manual

Group Field
Scrambler ON/OFF
Scrambler Code
When done editing in this programming screen you can proceed to other programming
screens, save your programming parameters to a file or proceed to writing the
information to the radio (assuming that editing has been finished for all other required
programming screens also).
R S
EPEATER ETTING
Double click on the "Repeater ch" field of the LTR programming screen to enter the

Repeater Setting programming sub-screen.

CS-F620TR Programming Software Manual
Description
Select "OFF," "ON" or "Inhibit". Setting this
to "OFF" sets the scrambler off as an initial
setting. Setting this to "ON" turns the
scrambler on as an initial setting. The
Scrambler key can then be used to toggle this
function on and off. Setting this field to "Inh"
(Inhibit) will prevent the scrambler from being
used while this system is selected. See the
Scrambler Type field in the Common
programming screen (page 60) for more
information on setting up the scrambler.
Set from 1 to 255. With the UT-109 ("Non-
Rolling" type) only the value 1 through 32 will
work. With the UT-110 ("Rolling" type) values
from 1 to 255 will work.
P S
ROGRAMMING UB
-S
CREEN
LTR Programming Screen
(rev 1.0) -
Default Suggested
Settings
OFF Set as
(Blank) needed.
1 Set the code
number to
match the
code used by
the customer
in general.
Mode and System
Indicator
Pertinent Text and Group
Detail from Parent
Programming Screen
Repeater Setting
Programming Sub-Screen
34