Connecting Radio; Main Screen - Icom IC-F620 Programming Software Manual

product ID (provided by Icom) before continuing. Once the software is installed, you can
start it by double clicking the CS-F620TR shortcut provided on the desktop or through
the start menu (navigate to "CS-F620TR"). At this point you can also install the
adjustment software by navigating to the CSF620TRADJ folder and executing "Setup"
there. This is only needed if you intend on performing radio alignment procedures and its
functionality is not discussed in this manual.
C R
ONNECTING ADIO
Connect the 25 pin side of the OPC-1122 Connector to the programming laptop with the
25 to 9 pin serial cable provided in the programming cable kit. Connect the microphone
connector side of the OPC-1122 into the microphone jack of the radio. Power the radio
on.
M S
AIN CREEN
From this screen, you can access all the functions of the software. The screen contains
five major components: the "Main Menu," the "Toolbar," the "Tree Menu" (with its
"Programming Screen Icons" and folders) and the "Programming Screen".
Tree Menu
• The Main Menu is used to provide access to all basic program functions not
associated with radio configuration.
CS-F620TR Programming Software Manual
Main Menu
Programming
Screen Icons
Toolbar
Programming
Screen
Introduction
(rev 1.0) -
2