Trouble Shooting; Disposal / Recycling Of Materials; Technical Data; Torque - Sunrise Medical Sopur Easy Life RT Directions For Use Manual

10.0 Trouble shooting

Wheelchair pulls to one side
• Check tyre pressure
• Check to make sure wheel turns easily (bearings, axle)
• Check the castor angle
• Check to make sure both castors are making proper contact
with the ground
Castors begin to wobble
• Check the castor angle
• Check to make sure all bolts are secure; tighten if necessary
(see the section on torque).
• Check to make sure both castors are making proper contact
with the ground
Wheelchair squeaks and rattles
• Check to make sure all bolts are secure; tighten if necessary
(see the section on torque).
• Apply small amount of lubrication to spots where movable
parts come in contact with one another
Wheelchair begins to wobble
• Check angle at which castors are set
• Check tyre pressure
• Check to see if rear wheels are adjusted differently

11.0 Disposal / Recycling of Materials

NOTE:If the wheelchair has been made available to you free of
charge, then it does not belong to you. If it is no longer required,
follow any instructions given by the organisation issuing the
wheelchair in order that it may be returned to them.
The following information describes the materials used in the
wheelchair in relation to their disposal or re-cycling of the
wheelchair and its packaging.
Specific waste disposal or recycling regulations may be in force
locally and these should take into consideration when disposal
arrangements are made. (This may include the cleaning or
de-contamination of the wheelchair before disposal.)
Aluminium: Castor forks, wheels, sideguards of the chassis,
armrests, frame, footrest, push handle
Steel: Fasteners, QR axle
Plastic: Handles, tube stoppers, castors, footplates, armpads
Packaging:Low density polythene bag, cardboard box
Upholstery:Woven polyester with PVC coatings and expanded
combustion modified foam.
Disposal or recycling should be done through a licensed agent
or authorised place of disposal. Alternatively your wheelchair
may be returned to your dealer for disposal.
52

12.0 Technical Data

Total width:
With standard wheels, incl. Handrims, narrow mount:
min. = 480 mm, max. = 680 mm
Total height:
min. = 750 mm, max. = 950 mm
Overall length including foot rests:
min. = 935 mm, max. = 1075 mm.
Maximum load: 100 kg
Weight in kg:
min. = 10 kg, max. = 15 kg
Heaviest part (Wheel) = 2.2 kg
Footrest = 0.8 kg
Sideguard Assembly = 1.3 kg
Wheel (each) = 2.2 kg
To lift or carry the wheelchair (without wheels, footrest and
sideguards), grip the upper frame tube and the backrest tube or
the middle of the seat sling.
TECHNICAL SPECIFICATIONS, (ALSO SEE PAGE 6)
ADDITIONAL NOTES
In Accordance with EN12183: 2009 all there listed parts (seat and
back upholstery, arm pad, side panel...) are fire resistant as per
EN1021-2 .
WARNING!
The Dynamic safe slope is dependent on the chair configuration,
the users abilities and the style of riding. As the users abilities and
style of riding cannot be pre-determined then the max safe slope
cannot be determined. Therefore this must be determined by the
user with the
assistance of an attendant to prevent tipping. It is strongly
recommended that inexperienced users have anti-tips fitted.
The wheelchair conforms to the following standards:
a) Requirements and test methods for static, impact and fatigue
strengths (ISO 7176-8)
b) Requirements for resistance to ignition in accordance with ISO
7176-16 (EN 1021-1)

13.0 Torque

Unless otherwise advised, the torque for M6 screws is 7 Nm.
Please refer to page 7 for details
Sopur Easy Life RT Rev.F