Power Connectors On Stk-Rps-150Ps (Rear View); Stk-Rps-150Ps Rps Cable And Ac Power Cord Connections - Enterasys A4H124-24FX Hardware Installation Manual

.
Note: No change in switch configuration is necessary for this installation.
Figure 2-10

Power Connectors on STK-RPS-150PS (rear view)

1 Redundant power supply connector
Figure 2-11

STK-RPS-150PS RPS Cable and AC Power Cord Connections

1 A4 switch
2 RPS cable (1 meter long)
3 STK-RPS-150PS redundant power supply
connector
4. If the switch itself is not plugged into power, the front panel RPS LED indicator will show that
a redundant power supply is now in operation.
.
Note: No change in switch device configuration is necessary for this installation.
This completes the installation.
Installing and Connecting a Redundant Power System
2 AC power connector
4 A4 switch redundant power supply connector
5 AC power cord (type varies depending on country)
6 AC power outlet with ground connection
(type varies depending on country)
Enterasys A4 Fast Ethernet Switch Hardware Installation Guide 2-17