Final Operations - CAME OPP Series Installation, Operation And Maintenance Manual

Make the necessary electrical connections as shown in the figure.
M1 N1 ENC1 M2 N2 ENC2

FINAL OPERATIONS

FASTENING THE COVERS
Once you have completed all electrical connections and commissioning, fit the covers as shown here
⚠ YOU MUST fi rst slide the covers forward and then snap them down into place.
❷
⚠
❹
Gearmotor with encoder (M1) 24 V DC, delayed when
M
closing.
M
Gearmotor with encoder (M2) 24 V DC, delayed when
opening.
⚠
❶
❺
❸
❻