Table of Contents
Advertisement
Available languages
Available languages
Fasten the bracket to the post ❶using suitable anchors and screws. If the post is made of metal, the bracket
can be welded to it.
Note: the holes on the bracket are for further opening angle variations of the gate leaf.
Fasten or weld the bracket to the gate ❷ .
❷
❶
FASTENING THE GEARMOTOR
Lubricate the bushing
and fit it into one of the holes on the post bracket.
Fasten the joint to the post bracket
using the M8 x 35 bolt and UNI 7474 M8 nut.
Advertisement
Table of Contents
