CAME OPP Series Installation, Operation And Maintenance Manual page 18

=============== Hand these instructions to the end user ===============
MANUALLY RELEASING THE GEAR MOTOR
⚠ Manually releasing the gate may cause an uncontrolled movement of the gate due to possible
mechanical anomalies or unbalancing.
RELEASE (fi gure )
- Open the hatch, fi t the trilobe key and turn it
- Take out the release tab.
LOCKING (fi gure )
Pull the tab down, turn the key clockwise to return it to its position and close the hatch.
❶
❶
WHAT TO DO IF ...
ISSUES
It neither opens nor
closes
The gate opens but
does not close
⚠
If the problem cannot be solved by following the fixes in the table or if any malfunctions, anomalies,
noises, vibrations or suspicious and unexpected behavior is experienced on the system, call for qualified
assistance.
POSSIBLE CAUSES
• Power supply is missing
• The gear motor is stuck
• The transmitter is emitting a weak signal or no
signal at all
• Control buttons or selectors stuck
• The photocells are working
❷
❷
POSSIBLE FIXES
• Check main power supply
• Lock the gearmotor
• Replace the batteries
• Check integrity of devices and/
or of electrical cables
• Check that there are no ob-
structions in the photocells' area
of operation
❸
❸