STANDARD INSTALLATION
1. Gear motor
2. Control panel
3. Transmitter
4. Key-switch selector
5. Flashing light
6. Photocells
7. Junction pit
8. Mechanical gate stops
⑤
④
②
GENERAL INSTALLATION INDICATIONS
⚠ Only skilled, qualifi ed staff must install this product.
PRELIMINARY CHECKS
⚠ Before beginning the installation, do the following:
make sure there is are opening and closing mechanical gate stops;
•
make sure that the point where the gearmotor is fastened is protected from any impacts and that the surface
•
is solid enough;
set up suitable tubes and conduits for the electric cables to pass through, making sure they are protected from
•
any mechanical damage.
⑥
⑧
⑦
①
⑥
⑥
⑥
①
⑧
③