Operation With Common Interface; What Is Common Interface; Inserting The Ca Module; Access Control For Ca Module And Smart Card - Grundig B50 A 850 B User Manual

OPERATION WITH COMMON INTERFACE

What is common interface?

Common Interface (CI) is an interface for DVB
7
receivers.
Scramble stations can only be viewed with a
7
CA module suitable for the encoding system
and the corresponding smart card.
The television set is equipped with a Common
7
Interface slot into which CA modules from
various providers can be inserted.
You can insert the provider's smart card
7
into the CA module in order to enable the
encrypted stations you want to see.

Inserting the CA module

Note:
Switch off the appliance before inserting
7
the CA module in the CI slot.
1 Insert the smart card into the CA module.
2
Insert the CA module with the smart card
into the CI slot on the television.
Note:
To see which CA module is in the Common
7
Interface slot, go to the »CA - Module«
submenu.
When you insert a CA module into the
7
CI slot on the television for the first time,
wait a few moments until the television has
registered the CA module.
Access control for CA module
and smart card
1 Press »MENU« to open the menu.
2
Press » « or »
V Λ
menu and press »
3 Press » « or »
Λ V
and press »OK« to confirm.
Notes:
This menu give operating instructions and –
7
after you enter your PIN code – access to
channels of the PAY-TV provider.
Other settings are described in the manuals
7
for your CA module and smart card.
The CA module is not supported in some
7
countries and regions. Please consult your
authorised dealer.
4 Press »EXIT« to finish the setting.
---------------------
« to select the »Channel«
>
« to confirm.
« to select »CA - Module«
ENGLISH
59