Table of Contents
Advertisement
• Allow to get up to speed before working gently across the
workpiece until smooth.
7. Release the trigger.
• Wait until the motor has stopped fully before putting the sander
down.
LOCK ON FEATURE
For continuous sanding:
1. Squeeze the trigger and then press the LOCK ON button.
• The sander will continue to run even if the trigger is released.
2. To release the lock on feature, squeeze the trigger again.
SPEED CONTROL
To control the speed settings, turn the
speed control wheel located on the
trigger handle to the required
position.
1 = 800 rpm
2 = 1000 rpm
3 = 1200 rpm
4 = 1400 rpm
5 = 1600 rpm
Max = 1750 rpm
EDGE/CORNER SANDING
If there is a need to sand edges or
corners of walls.
1. Press down on the release clip
2. Pull edge sanding cover away
from main sander body
This will give access to 1/4 of the
sanding disc edge for rounding
edges and corners.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
11
Advertisement
Table of Contents
