NOTICE:
If you choose to replace the battery with the computer in standby or sleep
mode, you have up to 1 minute to complete the battery replacement before the
computer shuts down and loses any unsaved data.
To remove the battery:
1 If the computer is connected to a docking device (docked), undock it. See
the documentation that came with your docking device for instructions.
2 Ensure that the computer is turned off.
3 Turn the computer over.
4 Slide and click the battery release latches to keep them open.
5 Slide the battery out of the bay.
1
battery
To replace the battery, slide the battery into the bay until it latches into place.
Storing a Battery
Remove the battery when you store your computer for an extended period of
time. A battery discharges during prolonged storage. After a long storage
period, recharge the battery fully (see "Charging the Battery" on page 61)
before you use it.
62
Using a Battery
1
2
battery release latches (2)
2