Internal Card With Bluetooth ® Wireless Technology; Removing The Card - Dell Vostro 1500 Owner's Manual

Internal Card With Bluetooth
Technology
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE:
To help prevent damage to the system board, remove the battery from the
battery bay before you begin working inside the computer.
If you ordered an internal card with Bluetooth wireless technology with your
computer, it is already installed.

Removing the Card

1 Follow the procedures in "Before You Begin" on page 151.
2 Remove the hinge cover (see "Hinge Cover" on page 158).
3 Disconnect the cable on the card.
4 Grasp the connector end of the card and slide it out from under the
securing tabs.
®
Wireless
Adding and Replacing Parts
179