1
1
metal securing tabs (2)
3
mylar sleeve
Replacing a WWAN Card
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel
resistance, check the connectors on the card and on the system board, and realign
the card.
NOTICE:
To avoid damage to the WWAN card, never place cables under the card.
1 Insert the
WWAN
"WWAN" at a 45-degree angle.
2 Press the other end of the
the card clicks into place.
card connector into the system board connector labeled
card down into the securing tabs until
WWAN
2
WWAN card
Adding and Replacing Parts
2
3
175